Omron proximity switch รุ่น E2E-S05S12-WC-C1

Omron proximity switch รุ่น E2E-X2E1-Z

Detection head size : M5

Type : Cylindrical type (with screw), Shield type

Detection distance : 1.2 mm ± 10%

Set distance : 0 to 0.84 mm

Hysteretic : 15% or less of the detection distance

Detectable object : Magnetic metal (Detection distance of non-magnetic metal decreases)

Standard detection object : Iron 4 × 4 × 1 mm

Response frequency : 4 kHz

Type of power supply : DC 3 wire type

Power-supply voltage : DC 10 to 30 V (including ripple (pp) 10%)

Operating voltage range : 10 to 30 VDC

Current consumption : 10 mA or less

Control output (output format) : NPN open collector

Control output (switching capacity) : 100 mA or less

Control output (residual voltage) : 2 V or less (when load current is 100 mA, cord length is 2 m)

Indicator light : Operation indicator light (yellow)

Action mode : No

Protection circuit : Load Short Circuit Protection / Output Reverse Connection Protection / Power Reverse Connection Protection / Surge Absorption

Ambient temperature range : At use: -25 to 70 ° C / Storage: -25 to 70 ° C

Ambient humidity range : When used: 35 to 95% RH / Storage: 35 to 95% RH

Influence of temperature : Within the temperature range of -25 to + 70 ° C, within ± 15% of the detection distance at 23 ° C

Effect of voltage : Within the range of the rated supply voltage ± 15%, within ± 2.5% of the detection distance at rated supply voltage

Insulation resistance : Between charging unit and casing: 50 MΩ or more (DC 500 V mega)

Withstand voltage : Between charging unit and casing: AC 500 V 50/60 Hz 1 min

Anti-vibration : Durability: 10 to 55 Hz Multiple amplitude 1.5 mm X, Y, Z direction 2 h

Impact resistance : Durability: 500 m / s ** 2 X, Y, Z directions 10 times in each direction

Protective structure:

IEC: IP 67

Internal standard: oil resistant

Connection method : Code pullout type (Cord length: 2 m)

Mass : Packing status: Approximately 35 g

Material:

Case: SUS303 (EN 1.4305)

Detection surface: Heat resistant ABS

Cord: PVC (PVC)

Tightening nut : SUS 430 (EN 1.4016) Toothed washer: SUS 303 (EN 1.4305)

Accessories : Instruction manual, format label, nut set