SQUIX applicators

 Applicator S1000-220 S1000-300 S1000-400

Cylinder stroke mm 220 300 400

Tamp stroke

below device mm 64 144 244

Compressed air bar 4.5

Applicator S3200

Real-time labeling

The applicator S3200 combined with a SQUIX is a cost-effective solution for all dispensing printers in semi-automatic operation or when vertically integrated in a production line. With the S3200 printed labels are automatically applied on a product. By means of a rotary cylinder the label is positioned 45° to 95° to the horizontal and placed on the product with a short stroke cylinder.

 

cab label printer SQUIX with applicator S3200vergrößern

Information on service life, pre-dispensing, compressed air regulation unit, process reliability and supporting air correspond with the applicator S1000.

 

Applicator S3200

Rotary cylinder 45°- 90°

Stroke cylinder up to mm 30

Compressed air bar 4.5

Tamp pads or blow pads are manufactured according to the label size.

 

  Tamp pad Blow pad

A3200-1100 M3200-1100 A3200-2100 M3200-2100

Material guide Left aligned Centered Left aligned Centered

Tamp surface W x H  min. mm 72 x 60 72 x 60

Label width mm 20-116 20-116

Label height mm 5-80 10-80

Product surface Flat

Product during labeling Not moving Not moving or in motion

Dispensing module S5104

For labeling on packaging on a conveyor belt. The product sensor identifies the labeling position. Dispensing is started and at the same time the next label is printed. Conveyor belt speed and print speed have to be synchronized. A reflective sensor monitors the positioning.

 

cab label printer SQUIX with dispensing module S5104vergrößern

Demand module S5104 S5106

To be used with SQUIX 4.3, SQUIX 4 SQUIX 6.3

Material guide Left-aligned

Label width mm 25-116 50-176

Label height mm 25-200

Distance from print line to peel-off plate mm 336-518

Product surface Flat

Product height Fixed

Product during labeling In motion, speed synchronized with the printer

Cycle time approx.1) 60 labels/min

Calculated with label height 100 mm, print speed 100 mm/s

 

 

Applicator S1000

SQUIX Applikator S1000

1 Long service life: The ball-bearing guides are low-wearing.

 

2 Flexible product heights: With the stroke cylinder labeling is possible at different heights. Different stroke lengths are available.

 

3 Compressed air regulation unit: Micro filters prevent from contamination. The compressed air regulator ensures a permanent high quality of labeling.

 

4 High process reliability: Supporting air jet stream, induction air and stroke speed are adjustable.  For sensitive products and packaging the pressing force can be reduced to less than 10N (1kg). To avoid contamination, the vacuum holes are cleaned with air pressure after each labeling process.

 

5 Label sizes: Labels widths from 25 to 176 mm and heights from 25 to 200 mm can be processed.

 

6 Supporting air: Used for blowing the labels onto the pad

 

Pre-dispensing button

To test the labeling process. Pushing the button causes the label to be printed and held by the pad. Pushing the button again starts the labeling process.