XC series

1.9 Label printer XC4

Printable resolution dpi 300

Print width up to mm 105.6

Print speed up to mm/s 125

Label printer XC6vergrößern

 

 

 1.10 Label printer XC6

Printable resolution dpi 300

Print width up to mm 162.6

Print speed up to mm/s 125

We are glad to assist you in the selection of proper ribbons.

 

Accessories for label printer XC series

Perforation and cutter

Cutter

Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes.

 

Perforation cutter

For XC4 printers only. Enables the perforation of the material for later manual separation.

 

Stacker with cutter

Stacker with cutter

For XC4 printers only. Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities.

 

 

1 Wide graphic display

White backlight for optimum readability.

 

2 Ribbon holder

Simple, centered insertion of the ribbon with three-part tightening axles.

 

3 Simple adjustment

The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin.

 

4 Antistatic brush

Particularly in case of plastic materials electrostatics is discharged after printing.

 

5 Peripheral connection

All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw.

 

6 Solid metal chassis

Die-cast aluminum. All components are mounted on it.

 

7 Roll holder

For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension.

 

8 Ribbon saver for printhead 1

The ribbon saver is used for labels to be partially printed. The print head is lifted within the unprinted area and the ribbon stopped during label feeding.

 

9 Fanfold guide

Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.