• Image
  • Image
  • Image
  • Image

เครื่องทำลมแห้งแบบใช้เม็ดสาร (TRIDENT)

บริษัท เอช.วาย.คอมเพรสเซอร์ จำกัด
โทรศัพท์:   02 452 5901
แฟกซ์:   02 452 5902
มือถือ:   086 5117511
เครื่องทำลมแห้งแบบใช้เม็ดสาร (TRIDENT) Heatless Desiccant Dryers - DP SeriesDesigned and tested to provide 100% clean, dry, oil-free compressed air at -40°c

เครื่องทำลมแห้งแบบใช้เม็ดสาร (TRIDENT)

 

เครื่องทำลมแห้งแบบใช้เม็ดสาร (TRIDENT)

 

     

เครื่องทำลมแห้งแบบใช้เม็ดสาร (TRIDENT) Heatless Desiccant Dryers - DP SeriesDesigned and tested to provide 100% clean, dry, oil-free compressed air at -40°c

     

Heatless Desiccant Dryers - DP SeriesDesigned and tested to provide 100% clean, dry, oil-free compressed air at -40°c atmospheric dew point, to safeguard your valuable pneumatic equipment.Trident Dryers are available in 19 models to suit your requirement. They work with pressures from 4 kg/cm2(g) to 70 kg/cm2(g) and flow upto 1920 m3/hr.Prefilteration The moisture laden compressed air passes through the pre filter. Here moisture load is reduced through coalesence. Condensation is removed through the drain valve ADV1. At the oil filter (2) oil vapors are removed completely, small levels of oil/water condensation are purged through the valve ADV2. Compressed air is then passed through a 3 way valve into Tower.Drying The Towers are filled with Activated Alumina as desiccant (Molecular sieve available as option). When air passes through Tower 1 which consists of "DRY" Dessicant, it gets completely dried, and passes through check valve and After Filter(3). At the after filter, Desiccant fines are removed. Therefore dry compressed air passes out at the outlet.Regeneration Regeneration takes place in 2 stages a) De-pressurisation b) By passing Dry air. Tower II consists of fully moist desiccant at pressure. This is suddenly De-pressurised by opening the purge valve. Water molecules weep out of the desiccant and appear on the surface. "Super Dry" purge air passes through the Regeneration "Nozzle" and the desiccant bed thereby completely carrying away the water molecules. Tower 2 gets regenerated and is ready for the next drying cycle.

 

#จำหน่ายเครื่องปั๊มลม #จำหน่ายปั๊มลมสกรู #เครื่องปั๊มลม #Aircompressor #เครื่องปั๊มลมราคาถูก #ปั๊มลม #screwaircompressor #ปั๊มลมRICHTRCH #ปั๊มลมสกรู #ปั๊มลมราคาถูก #ปั๊มลมคุณภาพ #ซ่อมปั๊มลม #โอเวอร์ฮอร์นปั๊มลม #ปั๊มลมที่ดีที่สุด #overhaulscrewaircompressor #ปั๊มลมอุตสาหกรรม #ปั๊มลมราคาถูก #Airdryer #เครื่องทําลมแห้ง #Mainlinefilter #ไส้กรองปั๊มลม #ถังลม #ถังพักลม #Airtank #ขายถังลม #อะไหล่ปั๊มลม #น้ำมันปั๊มลม #Airfilter #เดินท่อลม #จําหน่ายปั๊มลม

สอบถามรายละเอียดสินค้า
ส่งคำสอบถามถึง
คำสอบถามของคุณคือ (*):
ชื่อผู้ส่งคำสอบถาม (*):
อีเมล์ที่ใช้รับการตอบกลับ (*):
หมายเลขโทรศัพท์ของคุณ
ไลน์ไอดีของคุณ
เขียนสิ่งที่คุณต้องการสอบถามด้านล่าง (*)
Verified
Level 2 Saller
ที่อยู่: 17/1 บางกระดี่ 19 แสมดำ บางขุนเทียน กรุงเทพมหานคร 10150, ประเทศไทย
โทรศัพท์:   02 452 5901
แฟกซ์:   02 452 5902
มือถือ:   086 5117511
สินค้าอื่น ๆ
ดูทั้งหมด
เรามีความรู้ด้านปั๊มลมที่จะคอยให้คำแนะนำ และให้บริการแก่ลูกค้าที่ต้องการนำปั๊มลมไปใช้ ซึ่งปั๊มลมแต่ละชนิดจะมีการใช้งานที่แตกต่างกัน
ประเทศ:
ถังพักลม ใช้สำหรับเก็บลมที่ต่อมาจากปั๊มลม เหมาะสำหรับงานที่ต้องการใช้ปริมาณลมจำนวนมากในช่วงเวลาหนึ่ง หรือ ใช้สำหรับรักษาแรงดันในการใช้งานลมให้สม่ำเสมอ
ประเทศ:
ผู้จำหน่ายปั๊มลมอุตสาหกรรม เครื่องจักร อุปกรณ์ และอะไหล่ในระบบลมโรงงานอุตสาหกรรม บริการครบวงจรทั่วไทย ด้วยราคายุติธรรม
ประเทศ:
เราทำการคัดสรรเครื่องปั๊มลมก่อนนำออกจำหน่าย โดยแต่ละเครื่องที่เราคัดสรรนั้นได้ผ่านการตรวจสอบคุณภาพอย่างละเอียด
ประเทศ:
เครื่องทำลมแห้งแบบใช้เม็ดสาร มีคุณสมบัติเฉพาะ ในการดูดซึมความชื้นได้ดี หลักการทำงานและไดอะแกรม การทำงานจะแบ่งออกเป็น 2 Tower ดังภาพด้านบน Tower I และ II โดย Tower I จะทำลมแห้งก่อน
ประเทศ:
ให้บริการปั๊มลมอย่างครบวงจร ทุกรุ่น ทุกแบบ สามารถแวะมาปรึกษาหรือสอบถามสินค้ากับเราได้ก่อนการตัดสินใจซื้อ เพื่อประโยชน์ของท่าน
ประเทศ:
Thailand Trusted SMEs ศูนย์รวม SME ไทยที่คุณวางใจ