Omron Photoelectric Switch TL-W5MD1

Omron Photoelectric Switch TL-W5MD1

Detection head size : 18 mm x 10 mm x 30.5 mmv Type : Square, non-shielded type

Detection distance : 5 mm ± 10%

Setting distance : 0 to 4 mm

Hysteresis : Less than 10% of detection distance

Detectable object : Magnetic metal (nonmagnetic metal reduces detection distance)

Standard detection object : Iron 18 x 18 x 1 mm

Response frequency : 500 Hz (average value)

Power supply type : DC 2-wire system

Power-supply voltage : DC12 to 24V (Ripple (pp) 10% or less)

Operating voltage range : DC 10 to 30 V

Leak current : 0.8 mA or less

Control output (switching capacity) : 3 to 100 mA

Control output (residual voltage) : 3.3 V or less (load current 100 mA, cord length 2 m)

Indicator light : Operation indicator (red), setting indicator (green)

Action mode : NO

Protection circuit : Load short circuit protection

surge absorption

Ambient temperature range:

When using: -25 to 70 ° C

Storage: -25 to 70 ° C

Ambient humidity range:

When using: 35 to 95% RH

storage: 35 to 95% RH

Temperature effect : Within ± 25 ° C to + 70 ° C, ± 10% or less of detection distance at 23 ° C

Effect of voltage : Within ± 15% of rated power supply voltage, ± 2.5% or less of detection distance at rated power supply voltage

Insulation resistance : Between the charging part and the case: 50 MΩ or more (at DC 500 V mega)

Withstand voltage : Between the charging part and the case: AC 1000 V 50/60 Hz 1 min

Vibration resistance : Durability: 10 to 55 Hz, double amplitude 1.5 mm X, Y, Z directions 2h

Shock resistance : Durability: 500 m / s ** 2 times in each direction of X, Y and Z

Protective structure:

IEC: IP67

internal standard: oil resistant

Connection method : Cord drawer type (cord length: 2 m)

Mass : Packing condition: about 80g

Material:

Case: Heat-resistant ABS

Detection surface: Heat-resistant ABS

Accessories : instruction manual