![](https://quinl.quinlcdn.com/productImages/UploadImages/1910/1570182502_61666.jpg)
Omron proximity switch E2E-X2E1-Z
Detection head size : M5
Type : Cylindrical type (with screw), Shield type
Detection distance : 1.2 mm ± 10%
Set distance : 0 to 0.84 mm
Hysteretic : 15% or less of the detection distance
Detectable object : Magnetic metal (Detection distance of non-magnetic metal decreases)
Standard detection object : Iron 4 × 4 × 1 mm
Response frequency : 4 kHz
Type of power supply : DC 3 wire type
Power-supply voltage : DC 10 to 30 V (including ripple (pp) 10%)
Operating voltage range : 10 to 30 VDC
Current consumption : 10 mA or less
Control output (output format) : NPN open collector
Control output (switching capacity) : 100 mA or less
Control output (residual voltage) : 2 V or less (when load current is 100 mA, cord length is 2 m)
Indicator light : Operation indicator light (yellow)
Action mode : No
Protection circuit : Load Short Circuit Protection / Output Reverse Connection Protection / Power Reverse Connection Protection / Surge Absorption
Ambient temperature range : At use: -25 to 70 ° C / Storage: -25 to 70 ° C
Ambient humidity range : When used: 35 to 95% RH / Storage: 35 to 95% RH
Influence of temperature : Within the temperature range of -25 to + 70 ° C, within ± 15% of the detection distance at 23 ° C
Effect of voltage : Within the range of the rated supply voltage ± 15%, within ± 2.5% of the detection distance at rated supply voltage
Insulation resistance : Between charging unit and casing: 50 MΩ or more (DC 500 V mega)
Withstand voltage : Between charging unit and casing: AC 500 V 50/60 Hz 1 min
Anti-vibration : Durability: 10 to 55 Hz Multiple amplitude 1.5 mm X, Y, Z direction 2 h
Impact resistance : Durability: 500 m / s ** 2 X, Y, Z directions 10 times in each direction
Protective structure:
IEC: IP 67
Internal standard: oil resistant
Connection method : Code pullout type (Cord length: 2 m)
Mass : Packing status: Approximately 35 g
Material:
Case: SUS303 (EN 1.4305)
Detection surface: Heat resistant ABS
Cord: PVC (PVC)
Tightening nut : SUS 430 (EN 1.4016) Toothed washer: SUS 303 (EN 1.4305)
Accessories : Instruction manual, format label, nut set