Omron Photoelectric Switch EE-SX772A

Omron Photoelectric Switch EE-SX772A

Type : Grooved Type (T-shaped)

Luminous method : Non-modulated

Sensing method : Through-beam type

Sensing distance : 0 to 5 mm (slot width)

Operation mode : Dark-ON

Standard sensing object : Opaque object (2 x 0.8 mm min.)

Differential distance elements : 0.025 mm max.

Light source （Peak wavelength） : GaAs infrared LED (940 nm)

Indicator : No incident light (red)

Power supply voltage : 5 to 24 VDC ±10% (ripple (p-p)10% max.)

Current consumption : 35 mA max.

Control output （Output type） : NPN Open collector output

Control output （Load power supply voltage） : 5 to 24 VDC

Control output （Load current） : 100 mA max.

Control output （Residual voltage）:

0.8 V max. (at 100 mA load current)

0.4 V max. (at 40 mA load current)

Response frequency elements : 1 kHz min. (average 3 kHz)（See “Measurement condition of Response frequency elements”）

Illumination on the surface receiver : Fluorescent light: 1000 lx max.

Ambient temperature:

Operating: -25 to +55 ℃

Storage: -30 to +80 ℃ （with no icing or condensation）

Ambient humidity:

Operating: 5 to 85% RH

Storage: 5 to 95% RH （with no icing or condensation）

Vibration resistance : 20 to 2,000 Hz(peak acceleration 100 m/s**2), 1.5 mm double amplitude for 2 h (4 min periods) each in X, Y, and Z directions

Shock resistance : 500 m/s**2 for 3 times each in X, Y, and Z directions

Degree of protection （IEC60529） : IP60

Connection method : Pre-wired models

Cable length : 2 m

Material : Case: Polybutylene phthalate (PBT)